TS9080B Pressure Blast Cabinet Manual Type with pressure tank used grits
Specifications
| Work cabinet dimensions | L900mm*W800*D650mm |
| Power Supply | 220V 50Hz |
| Working Pressure | 0.6-0.8Mpa |
| Air Consumption(Approx) | 1.6-3m³/min |
| Quantity of Gun | 1 |
| Load Capacity | ≤60Kg |
| Motor for Dust Collector | 750W 220V 50Hz |
| Machine Lighting | 15W 220V 50Hz |
| Connection for Compressed Air hose | Φ16mm |
| Initial Abrasive(Approx) | 10~15Kg(36-320mesh size) |
| Total Weight (Approx) | 250Kg |
Applications
1. Clear up the oxide, glitch, dross of heat treatment parts and weldment. Quality of clearance is up to Sa3.
2. Clear up the minor glitches and surface residues.
3. Plating and cleaning need to do before sand-blasting to improve the adhesion.
4. Apply for improving the physical and mechanical properties in the surface, such as changing the surface stress state, improving the lubrication conditions with the coupling.
5. Apply for surface strengthening treatment and eliminating stress.
6. Apply for renovation of old parts.
7. Apply for cleaning the mold, protecting the mold surface, improving the mold accuracy and product quality.
Features
- Simple operation, easy to maintain, less wearing parts, low failure rate.
- The pressure tank adopt the new exhaust valve, solve the problem about general pressure sandblasting cabinet in China.
- Adopt the dust collector meet the requirements of environmental protection. High visibility in the working cabinet when you are operating. There are no dust to leak out.
- Suitable for high-strength abrasive to achieve shot strength process.
Recommended Abrasive:steel shots/grits, stainless steel shots, zirconium shots, 10~30#brown alumina and glass beads.
Not recommended abrasive: Quartz sand, above 30#brown alumina and glass beads.
Product Tags:
|
|
Manual 750W Direct Pressure Blast Cabinet With Tank 8mm Nozzle Diameter Images
|
